|
DennisC94 (November 30, 1999 at 12:00 am)
what cpu cooler?
DaddyJace (November 30, 1999 at 12:00 am)
actually you can set the voltage to 1.7 to test a post. otherwise water cooling would be pointless no?
DaddyJace (November 30, 1999 at 12:00 am)
Not true, you can actually set the cpu to 1.7v to see if it posts at a certain clocks. I wouldn't recommend trying to boot into windows at that voltage, but to atleast check the post. Otherwise water cooling would be a waste no?
sometube123 (November 30, 1999 at 12:00 am)
So what? 1.55V Is the VMAX. This guy has his sitting at 1.61+ ! Suicide Run. I have mine at 1.55V For 3.6GHZ, doing 56C load, which is all good. But this guy is killing his chip.
jayjaybwoyxx (November 30, 1999 at 12:00 am)
i run mine at 1.5v 24.7 at 3.4ghz on air cooling and my cpu runs at 19c idle 30c full load. been running at 1.5v for about 9 months now no glitches
jayjaybwoyxx (November 30, 1999 at 12:00 am)
i run mine at 1.5 ghz 24.7 mines oc stable to 3.4ghz and it runs at 19c idle 34c full load
sometube123 (November 30, 1999 at 12:00 am)
1.61V, are you insane? Nice suicide run.
JoulePlace (November 30, 1999 at 12:00 am)
Yeah it helps if you can get into Windows ;).
vizeKx (November 30, 1999 at 12:00 am)
TKSOWNAGE, your dumb, the bios will always recognise the chip at its default speed before it tests it ACTUAL speed. Read second bios prompt...
Tksownage (November 30, 1999 at 12:00 am)
its still running at stock speeds i saw e6600 @ 2.40ghz little off 4ghz? |
